APPLICATION:
DOVE™ DRY CONCENTRATOR in configuration with the DOVE™ Dry Processing Plant (SPD), offers
the opportunity to exploit and recover metals and minerals from dry deposits, which were left due to
the lack of water.
Dry Concentrator is configured for concentration, separation and
recovery of free-flowing materials
finer than (-2mm) or (10 Mesh B.S.)
For concentration, separation and recovery of materials with close fraction of particle density, which
are
not amenable to wet concentration methods.
In configuration with DOVE™ Dry Processing Plant (SPD), for
concentration, separation and recovery
of diamonds, color gemstones, gold, and other precious metals,
base metals, ferrous metals, light
metals etc.
To be configured after Hard-Rock
Crushing Plant (i.e. DOVE™ Mobile or Stationary Crushing Plants)
for dry concentration and recovery of gold,
other precious metals, base metals, ferrous metals, light
metals, etc.
To be
configured in a wet processing plant for concentration, separation and recovery of metals and
other minerals,
ferrous metals after DOVE™ Dual Flow Rotary Dryer.
To be deployed as a stand-alone unit for concentration
and recovery of metals, precious stones and
other minerals out of beach sand.
ADVANTAGES:
DOVE™ Dry
Concentrator offers unique advantages over Wet Concentration methods.
Consider these advantages:
Dry
Concentrators produce higher grade products with less concentrate loss than wet concentration
methods.
DOVE™ Dry Concentration plants may be located anywhere, regardless of water supply. There is no
water to pump
or bring in from a distance, therefore eliminating that cost.
Increases capacity and cuts down on the
number of units and space necessary; resulting in smaller
and less expensive plants with lower power costs.
Due to the greater sensitivity to slight differences in density of the particles, dry concentration will
successfully
treat ores which are not amenable to wet concentration.
Ore may be efficiently separated at the economical
releasing point of the minerals, thus making
it possible to treat ore at a much more finely ground stage which
reduces the cost of production.